We have updated our data protection policies based on new GDPR act. See Details
You are viewing products available in Westburne all division.
Change
Contact your local branch to check product availability.
Log In
to view your price and product availability
Contact your sales representative to confirm availability.
EA
Min: 1 EA , Multiple 1 EA
Technical Documents
Technical Documents
Product Details
Product Details
7626T110 INDOOR, 5-15 KV TAPE/WIRE S
3M™ Cold Shrink QT-III Silicone Rubber Termination Kit 7620-T and 7690-T Series contains one-piece, non-skirted, silicone rubber terminations, meets IEEE Standard 48 Class 1 for indoor and weather-protected applications. The kits are designed for terminating solid dielectric shielded power cable rated 5–35 kV, with tape shield, wire shield and UniShield® constructions.
Each kit contains sufficient quantities of material to make three single-phase terminations. The termination assemblies consist of a tubular insulator, high dielectric constant (Hi-K) stress control tube, conformable Hi-K stress controlling compound, and built-in environmental top seal. The insulator is made of a dark gray silicone rubber with advanced tracking resistant and hydrophobic properties. Note:Lugs need to be ordered separately. Exceptions:For T-150 Kits, 150 kV impulse level meets the impulse requirements for 35 kV class equipment where indoor terminations are used. 7620-T Kits are designed and assembled with stress controlling compound only.
3M™ Cold Shrink QT-III Silicone Rubber Termination Kit 7620-T and 7690-T Series contains one-piece, non-skirted, silicone rubber terminations, meets IEEE Standard 48 Class 1 for indoor and weather-protected applications. The kits are designed for terminating solid dielectric shielded power cable rated 5–35 kV, with tape shield, wire shield and UniShield® constructions.
Each kit contains sufficient quantities of material to make three single-phase terminations. The termination assemblies consist of a tubular insulator, high dielectric constant (Hi-K) stress control tube, conformable Hi-K stress controlling compound, and built-in environmental top seal. The insulator is made of a dark gray silicone rubber with advanced tracking resistant and hydrophobic properties. Note:Lugs need to be ordered separately. Exceptions:For T-150 Kits, 150 kV impulse level meets the impulse requirements for 35 kV class equipment where indoor terminations are used. 7620-T Kits are designed and assembled with stress controlling compound only.
Technical Specifications
Technical Specifications
Termination Kits | |
| Product Name | INDOOR CABLE TERMINATION KIT |
|---|---|
| Cable Insulation Outer Diameter | 1.53 TO 2.32 INCH |
| Contents | (3) HI-K SILICONE RUBBER TERMINATION, (3) PRE FORMED GROUND BRAID, (3) CONSTANT FORCE SPRING, (6) MASTIC SEAL STRIP, (1) SCOTCH[T] CC-2 CABLE PREPARATION KIT, (1) INSTRUCTION SHEET |
| Conductor Size | 1750 TO 2000 KCMIL (5 KV 100 PERCENT/5 KV 133 PERCENT), 1500 TO 2000 KCMIL (8.7 KV 100 PERCENT/8.7 KV 133 PERCENT), 1250 TO 2000 KCMIL (15 KV 100 PERCENT/15 KV 133 PERCENT) |
| Number of Terminations | 3 |
| Additional Information | APPLICABLE STANDARD IEEE |
| Pkg Volume UOM | CF |
| Mfr Fullname | 3M ELECTRICAL MARKET ELECTRICAL PRODUCTS |
| Pkg Qty | 1 |
| Pkg Type | CA |
| Pkg Width | 12.3 |
| Mfrcode | 3M |
| Bil Rating | 110 KV |
| Pkg Volume | .6 |
|---|---|
| Voltage Rating | 5 TO 15 KV |
| Insulator Material | SILICONE RUBBER |
| Pkg UOM | EA |
| Pkg Length | 14.8 |
| Catalog Number | 7626-T-110 |
| Mfr UNSPSC | 39121400 |
| Pkg Height | 5.7 |
| Cable type | TAPE/WIRE SHIELDED, UNISHIELDED |
| Type | COLD SHRINK |
| Pkg Weight | 7 |
| Pkg Weight UOM | LB |
| Description | 7626T110 INDOOR, 5-15 KV TAPE/WIRE S |