We have updated our data protection policies based on new GDPR act. See Details
You are viewing products available in Westburne all division.
Change
Contact your local branch to check product availability.
Log In
to view your price and product availability
Contact your sales representative to confirm availability.
EA
Min: 1 EA , Multiple 1 EA
Technical Documents
Technical Documents
Product Details
Product Details
5331 MOTOR LEAD SPLICE KIT (3/KIT)
3M™ Motor Lead Inline Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables. 3M™ Motor Lead Splicing Kits 5331-5334 can accommodate inline connections, 5/8 kV shielded and non-shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal on the inline kits.These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in an inline configuration, then insulated and sealed with the 3M Motor Lead Splicing Kits. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ 30000 Series copper compression lugs, or other UL listed copper lugs, can be used. In addition, 3M™ Motor Lead Splicing Kits 5331-5334 require vinyl tape which can also be purchased separately.For inline splice kits: The longitudinal space required for assembly will be approximately 2 (splice cover length), to allow space for the splice while the connection is being made.Kit contents include:• (3) Cold Shrink tubes• (12) Adapters• (3) Rolls Scotch® Stress Control Tape 2220• (3) Bags of solvent cleaning cloths• (6) Tubes of silicone grease• (3) Rolls Scotch® Linerless Rubber Splicing Tape 130C• (3) Instruction sheets
3M™ Motor Lead Inline Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables. 3M™ Motor Lead Splicing Kits 5331-5334 can accommodate inline connections, 5/8 kV shielded and non-shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal on the inline kits.These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in an inline configuration, then insulated and sealed with the 3M Motor Lead Splicing Kits. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ 30000 Series copper compression lugs, or other UL listed copper lugs, can be used. In addition, 3M™ Motor Lead Splicing Kits 5331-5334 require vinyl tape which can also be purchased separately.For inline splice kits: The longitudinal space required for assembly will be approximately 2 (splice cover length), to allow space for the splice while the connection is being made.Kit contents include:• (3) Cold Shrink tubes• (12) Adapters• (3) Rolls Scotch® Stress Control Tape 2220• (3) Bags of solvent cleaning cloths• (6) Tubes of silicone grease• (3) Rolls Scotch® Linerless Rubber Splicing Tape 130C• (3) Instruction sheets
Technical Specifications
Technical Specifications
Grommet Strip Spiral & Split Harness Wrap | |
| Pkg Dmnsn UOM(3) | IN |
|---|---|
| Motor Lead Cable Size | 10 TO 4 AWG |
| Pkg Volume UOM | IN |
| Number of Splices | 3 |
| Pkg Type | CA |
| Pkg Weight | 3 |
| Pkg Dmnsn UOM(2) | IN |
| Pkg Volume | .267 |
| Catalog Number | 5331 |
| Pkg Width | 6.5 |
| Mfrcode | 3M |
| Pkg Weight UOM | LB |
| Product Name | MOTOR LEAD CONNECTION KIT |
| Pkg Length | 14.2 |
| Approval | CSA |
|---|---|
| Voltage Rating | 5 TO 8 KV |
| Pkg Height | 5 |
| Mfr Fullname | 3M ELECTRICAL MARKET ELECTRICAL PRODUCTS |
| Pkg UOM | EA |
| Additional Information | STANDARD PACKAGE 1 PER CASE |
| Feeder Cable Size | 8 TO 4 AWG |
| Connector Type | 1 OR 2 HOLE COPPER LUG |
| Contents | SOLVENT CLEANING CLOTHS, SILICONE GREASE LUBRICANT, ADAPTER SLEEVES, COLD SHRINK SLEEVES, RUBBER TAPE, SCOTCH 2220 STRESS CONTROL TAPE, INSTRUCTIONS |
| Cable type | NON SHIELDED, TAPE SHIELDED, UNISHIELDED, WIRE SHIELDED |
| INSULATION MATERIAL | EPDM RUBBER |
| Pkg Dmnsn UOM(1) | IN |
| Mfr UNSPSC | 39121718 |